Ultra Drain Guard
The Drain Guard effectively removes coarse sediments, oil, grease, litter and debris from stormwater.

How it works
When water enters a catch basin equipped with an insert, the polypropylene fabric traps the contaminants while the water passes through. If the fabric filter becomes saturated with elements, the oil absorbing mini-boom captures and holds floating hydrocarbons while allowing the water to escape through the water outlets. The sediments and other solids settle and are contained in the bottom of the Insert.

Size: Collar 36" x 45", Bag 22" deep, Opening 10" diameter

Effectiveness: Test results - Sediment removal 84% - 99% Oil Removal 65% - 75%

Flow rate: Maximum overflow rate - up to 300 gallons per minute. (Insert has overflow outlets to allow for excessive water from heavy rain showers to bypass the system, reducing the chance of flooding or ponding).

Simple installation and Removal
To install, remove the grating, place the Insert in the catch basin, set the grating back over the catch basin and trim the excess fabric. To remove, secure the blue pull strap, remove the metal grate and lift out the insert. Properly dispose of the used insert or empty to use it again.

Ultra Curb Guard Keep sediment, oil, silt and debris out of curb inlets and stormwater systems. For use with curb openings without street grates. Available in standard lengths from 6’ to 14’. Conforms to shape of curb with built in overflow capacities. Design allows clean water to flow through while trapping sediment and/or oil depending on model.

Ultra Basin Guard Basinguard.jpg Replace messy hay bales and keep sediment and oil from entering drains and inlets. Two standard sizes fits up to 24" x 24" grating and up to 4’ x 6’ grates. Sediment only or Sediment and Oil models available.

Ultra Pipe Sock Controls the flow of sediment and oil out of headwall and other types of pipes. Use in Pond applications where vertical pipes extend above the water surface, but preventing sediment in-flow during high water events is required.

Ultra Dewatering Bag Contain sediment and oil pumped out during dewatering operations. Oil/ sediment model detains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Available in 6’ x 6’ to 15’ x 15’ sizes

Drain Covers are an essential component of any spill response plan. Available in a variety of materials and sizes to meet any requirement.

Neoprene Drain Cover 3’ x 3’ x 1/16" Neoprene Drain Cover Container – wall mount (holds up to 4 drain covers) Round Drain Cover – sand filled, Large 30", diameter, Small 20" diameter

Chemical Drain Covers 24", 36" & 48" square PVC compound, tear-resistant, soft and pliable, sticks to most surfaces and can be re-used repeatedly. Non –absorbent.

Plug N Dike Plug Rugs
8" x 8", 16" x 16" and 24" x 16" – 4/case
Fabric reinforced Plug N’ Dike pad. Simply lay it over drains, storm sewer inlets, or around pipe runs to seal of and prevent the spill from entering. Plug Rugs are also an excellent method for plugging holes or rips in tankers. They will seal off even with the fuel or chemical already flowing over the surface. Overlap rugs to cover larger openings.